Polytek PolyPoxy® 6060 Surface Coat Epoxy 65.5lb Kit

Availability:

Out of stock

PolyPoxy® 6060 a blue, room temperature curing (RTV) surface coat epoxy designed for quality reproduction of a variety of surfaces. This epoxy is a general purpose surface coat formulated for the fabrication of laminated tools, including dies, foundry patterns, core boxes, and router, trim and inspection fixtures. When cured, this resin system provides a hard, tough, and chip-resistant surface.

PolyPoxy® 6060 a has a pot life of 30 to 35 minutes, a demold time of 12 to 16 hours, and cures to a Shore D89 hardness.

WARNING: This product contains Bisphenol A (CAS 25068-38-6), a chemical known to the State of California to cause birth defects or other reproductive harm, and contains crystalline silica, quartz (CAS 14808-60-7), a chemical known to the State of California to cause cancer.  For more information, go to www.P65Warnings.ca.gov. 

FOR INDUSTRIAL/PROFESSIONAL USE ONLY. 

 Technical Specifications

• Mix Ratio by Weight: 100A:9B
• Mix Ratio by Volume: 100A:15B
• Shore Hardness: D89
• Maximum Application Thickness: 3/8"
• Pot Life: 30-35 min.
• Demold Time: 12-16 hr.
• Cured Color: Blue
• Mixed Viscosity: 25,000 cP
• Specific Gravity: 1.76
• Specific Volume: 15.8 in³/lb
• Tensile Strength: 7,200 psi
• Flexural Strength: 8,900 psi
• Compressive Strength: 16,400 psi
• Heat Deflection Temp.: 158°F
• Notes: Stir Resin thoroughly before use.
• BEFORE USE: Thoroughly read Safety Data Sheets, Technical Bulletin, and product labels.
• WARNING: THE EPOXY CURE REACTION IS VERY EXOTHERMIC. Do not apply in thicknesses greater than the recommended maximum thickness.  

TDS

SDS Resin

SDS Hardener