Trow & Holden

Each Air Hose Assembly is made of light, highly flexible, and very durable 3/8in air hose, starts and ends with a male 1/4NPT fitting, and includes an inline ABS stopcock valve for controlling air flow.

Comfort and control are the big advantages of installing a Pistol Grip on your pneumatic carving tool. The rubber loops fit snugly around the back of the air hammer to provide a contoured hardwood handle that helps isolate vibration without sacrificing co

Trow & Holden American Air Hammers

A traditional European-style mallet, the Bell Hammer provides an alternative to our standard Hand Hammers.  This hammer's round head and unique bell shape promotes better contact with the chisel while reducing the risks of mis-strikes and chisel mushroomi

Our 5/16in shank Bantam Bushing Chisels are our smallest, most delicate bushing chisels, intended for use in the Barre Bantam Pneumatic Hammer. These carbide-tipped bushing chisels are ideal for texturing features on small-scale stonework.

Our 5/16in shank Bantam Chisels are our smallest, most delicate chisels, intended for use in the Barre Bantam Pneumatic Hammer. These carbide-tipped chisels are ideal for detail carving and lettering applications.

The Criss-Cross Bush Chisel leaves a unique cross-hatched finish and generally follows the 9-Point or Three-Blade bushing chisels.

The Carbide Hammer Point is an efficient way to rough out block or remove high spots. The hammer can be swung directly into the stone, used as a striking hammer, or held on the stone and struck by another dual-purpose or striking hammer of comparable weig

Our smallest carbide-tipped hand chisels feature a turned relief behind the blade making it easier to get into tight spaces for fine detail carving. Chisels are 7in long and all sizes can be ordered with either flat or rondel (rounded) blade styles. The 1

Use the Hand Chisel for general stone shaping and roughing out applications.

Use the Offset Hand Set when the chipper style is desired but more strength is needed. This tool makes it easier to see your pitch line and also helps to avoid nicking as you trim your stone.

The Hand Point is the perfect tool for roughing out and knocking off high spots. Use the Hand Point rather than the corners of your other carbide tools -- it's made for the job!

The Carbide Hand Tracer is used to split stone or to score a line before trimming.  Featuring a carbide-tipped blade, this Hand Tracer offers the best-possible wear resistance and performance when splitting the hardest types of stone.  The carbide-tipped

Our newly designed Limestone Carving Chisels feature finely-tapered blades that are sharpened for use on limestone and other soft stone. The octagonal stock allows for a precise degree of control. These chisels are designed for use with Trow & Holden Pneu

Our Carbide Mallet Head Chisels are intended for sculpting and stone carving applications, and feature carbide-tipped blades so the chisels hold their cutting edge longer than chisels with hardened steel blades.  These chisels are not suitable for more ag

The 16-Point Bushing Chisel has a 1in-square, solid carbide tip, and delivers a comparable finish to our mid-size 4-Point Bushing Chisel.  The increased size of our 1in-square bushing chisels spreads the force of the pneumatic hammer over a slightly large

The 25-Point Bushing Chisel has a 1in-square, solid carbide tip, and delivers a comparable finish to our 9-Point Bushing Chisel.  The increased size of our 1in-square bushing chisels spreads the force of the pneumatic hammer over a slightly larger surface

The 4-Point Bushing Chisel is our most aggressive carbide Bushing Chisel. It can be used for roughing out, removing high spots, or to create a rough stippled finish.

The 9-Point Bushing Chisel is less aggressive than our 4-Point chisels. It can be used for more gradual high spot removal, evening out the coarse finishs left by 4-Point and toothed chisel, or to add texture to sawed surfaces.

The 3-Blade Bushing Chisel, like the 9-Point, can be used for gradual material removal. It leaves an axed or brushed finish.

The carbide Frosting Chisel is used on soft stone to create a soft, matte finish. For best results, the fine teeth the Frosting Chisel's solid carbide tip should be kept clean and never used on hard stone or abrasive stone.

The Cup Chisel will more easily follow the contours of concave or convex surfaces without digging into the stone. It also leaves small crescent marks, creating a unique texture.

The narrow profile of the Carbide Cape Chisel makes it an ideal tool for maneuvering within tight joints and removing hard material from spaces with limited access for a full-width chisel.

Made exclusively by Trow & Holden Company, our Carving Chisels are the same size and shape as traditional machine chisels but feature an elongated carbide tip with three times more carbide, so they will last longer and require less maintenance. Available