1 2

Smooth-On

SO-CURE™

SO-CURE™

$19.99 USD
$0.00 USD $19.99 USD
Sale Sold out
Shipping calculated at checkout.
Title

4 in stock
POWERED BY

We've got you covered.

Package Protection gives you peace of mind while saving you time and money.

  • Package Protection

    Coverage in case your package is damaged in transit, stolen, or doesn't arrive.

  • Instant Issue Resolution

    Get a refund or replacement in just a few clicks.

  • 24/7 Claim Support

    Route is here for you whenever an issue arises — with an average response time of under an hour.

Route Package Protection extends coverage for online purchases that are lost or damaged in transit, or stolen immediately after the carrier's proof of delivery where Route traces the transportation. Route App, Inc. (Route) is the named insured on the package insurance policy ("Policy"); Route Insurance Solutions ("RIS"), Route's licensed producer entity, procures the Policy from SEG Insurance Ltd. Route, through RIS, may receive compensation for its services.

SO-CURE™ Cure Accelerator is an additive designed to accelerate the cure time of some Smooth-On urethane liquid plastic products without significantly affecting ultimate physical properties. This allows for much faster demolding of a part or casting from a mold.

Instructions

Safety - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.

Store and use material at room temperature (73°F/23°C). This product has a limited shelf life and should be used as soon as possible.

MEASURING & MIXING...

The accelerator is added to Part B by weight and should be thoroughly mixed with Part B before adding Part A. Important: Adding the accelerator drastically reduces the pot life (time you have to mix and pour material) of the liquid plastic product.

Example: To reduce the demold time of Task™ 4 from 16 hours to 1 hour, add 2.5 grams of accelerator to 100 grams of Task™ 4 Part B. Mix thoroughly for one minute, making sure that you scrape the sides and bottom of your container several times. Next, add 100 grams of Part A and mix thoroughly for one minute, again making sure that you scrape the bottom and sides of your container several times. Do not delay between mixing and pouring, as your Pot Life is about 5 minutes. In one hour, the plastic casting can be demolded from the original mold. Ultimate physical properties will be reached overnight.

Smooth-On Liquid Plastic % SO-CURE™
(Added by Weight to Part B)		 Pot Life (minutes) Demold Time Shore D Hardness
TASK™ 18 0.25
1.5
2.5		 11
2.5
1.5		 3 hours
2 hours
1 hour		 82
84
86
TASK™ 11 0.25
1.5
2.5		 5
1
0.5		 3 hours
2 hours
1 hour		 70
70
72
TASK™ 4 0.25
1.5
2.5		 10
3
1.5		 30 minutes
10 minutes
10 minutes		 75
75
75

 

 

SDS

TDS

View full details