TASK 16 3 Gallon Kit Special Order

ASK®16 is a low odor, fast-setting Shore 80A/30D urethane that offers very high tear strength, impact resistance and wear resistance. TASK®16 is phthalate free, mercury free and MOCA free. Mixed one part A to two parts B by weight, TASK®16pours easily. Working time is 6 minutes and handling time is 90 minutes at room temperature. Cured rubber has exceptional performance characteristics and dimensional stability. TASK® 16can be colored with SO-Strong® or Ignite® colorants.TASK®16 is suitable for making fast mechanical parts, gaskets, wheels and pullies, impact resistant props, and archival master models. It is also used to make fast, wear resistant rubber molds for casting concrete or concrete stamping pads. TASK®16 is also an excellent choice for rotocasting to create hollow semi-rigid castings.

IMPORTANT:Cured TASK® 16 will inhibit the cure of liquid platinum silicone. You can not pour platinum silicone into cured TASK® 16. Tin silicone must be used if you intend to pour silicone against cured TASK® 16.

• Mix Ratio: 1A : 2B by weight (gram scale required)
• Mixed Viscosity (cps): 1,400(ASTM D-2393)
• Specific Gravity (g/cc): 1.08(ASTM D-1475)
• Specific Volume (cu. in. /lb.): 25.64
• Pot Life: 6 minutes (73°F/23°C)(ASTM D-2471)
• Handling time: 90 minutes (73°F/23°C)
• Full Cure: 24 hours (73°F/23°C)
• Color: Light Yellow
• Shore Hardness: 80A/30D(ASTM D-2240)
• Tensile Strength (psi): 2264(ASTM D-412)
• 100% Modulus (psi): 855(ASTM D-412)
• Elongation @ Break: 233%(ASTM D-412)
• Die C Tear Strength (pli): 197(ASTM D-624)
• Shrinkage: .0025 in./in.(ASTM D-2566)
• Dielectric Constant (1 MHz): 4.59(ASTM D150-87)
• Dissipation Factor (1 MHz): 0.064(ASTM D150-87)