Rotten Stone 1lb
Rotten Stone 1lb
23 in stock
RAINBOW ROTTEN STONE is an extremely fine abrasive powder which when mixed with oil can be used to create a hand rubbed, polished finish for dull, scratched wood surfaces. It is used as a follow up polishing agent after a RAINBOW PUMICE STONE rubdown to achieve a higher sheen than would be possible by using just PUMICE STONE. ROTTEN STONE can be used as a fine polishing agent for finishing painted, lacquered or varnished surfaces to a uniform high gloss, non-glare appearance. Other uses include removing tarnish and polishing pewter and other low luster metal surfaces.
USES:
- Polishing wood surfaces
- Polishing pewter and other low luster metal surfaces
- Removing tarnish from metal
- Uniform particle size
Surface Preparation:
Wood surface to be polished should be clean and thoroughly dry.
Mixing:
No mixing is necessary..
Directions: Wood polish
Saturate rubbing felt or plain soft cloth with light oil. Dip it in ROTTEN STONE and shake off the excess. Apply, using uniform pressure over a small area, using approximately 6-8 strokes, always rubbing with the grain of the wood. Wipe off the excess ROTTEN STONE with a clean, oil saturated cloth. Remove oil with a plain, dry cloth. This will give a satiny finish. If a gloss finish is desired, use water instead of oil. The oil rubdown is slower than water, but both processes are very effective. Finish the job with a final rubbing of dry ROTTEN STONE.
Directions: Metal Polish
Mix ROTTEN STONE with household mineral oil or cooking oil to a creamy consistency. Using a damp sponge or cloth, apply to metal. Before polish dries, rinse with lukewarm water. Finish the job with a final rubbing of dry ROTTEN STONE or RAINBOW COMMERCIAL WHITING.
Coverage:
Amount of surface area polished will vary with the type and condition of the wood and the finish desired.
Packaging:
Available in 1 pound boxes with sealed plastic bags (12 per carton), 5 pound boxes with sealed plastic bags (6 per carton) and 25 pound and 50 pound multiwall paper bags with moisture barrier.
Color:
Light gray
TECHNICAL DATA:
Particle Size.......................................... 400 mesh
pH 7.65
LIMITATIONS:
Care should be taken when rubbing so as not to create scratching on the surface.
CAUTION:
Keep Out Of Reach Of Children.
Share
- Choosing a selection results in a full page refresh.
- Opens in a new window.