Permalac NT

Permalac NT is our most ecological formula, with under 70 g/l of VOCs! It does not contain toluene, has little to no odor, and demonstrates exceptional performance given its ultra-low VOC value. The Permalac NT provides excellent durability on steel, aluminum, brass, and bronze, as well as on other substrates such as stone, wood, and fiberglass. Our Permalac NT product has been FDA food-grade tested and holds a ClearChem certification in being compliant according to LEED standards. It is suitable for indoor and outdoor application. Permalac NT is available in semi-gloss, satin, matte, and ultra-flat sheens.

Physical Properties
Color Clear
Gloss at 20/60 35.878 (on steel)
Volume Solids 9.5%
Weight Solids 10%
Weight per Gallon 7.7 lbs
Coverage per Gallon 400 sq ft
VOC <50 g//L (16 g/L approx.)
Dry Film Thickness 0.3-0.4 mils/coat*
*Recommended total dry mil thickness: 1.2 mils minimum
Physical Resistance (on steel)
Adhesion (ASTM 3359 & Crosshatch test) 5B
Pencil Hardness (ASTM 3363) 4H

Taber Abrasion Test 11.8 mg @ 300 cycles
Flexibility (ASTM D522) Passed Mandrel Bending Test
Impact (ASTM D2794) 160/80
MEL Double Rubs (ASTM D4792) 10
Corrosion Resistance (ASTM B117, 5% NaCl spray)
10= no rust, 0= rusted
100 hrs 200 hrs 300 hrs
6 5 3

Application Characteristics
Mix Ratio Full strength for brush, reduce 20% for spraying

Reducer NT Low Odor Thinner OR #770 Low VOC Thinner
Cleaning Solvent Lacquer thinner or acetone
Dry Time 10 minutes to touch dry, 20 minutes recoat
Cure Time 24 hours for light handling, 30 days to fully cure or bake at 300°F for 30 minutes

Application Equipment
HVLP spray gun, Cap tip 1.2-1.3, 20-25 PSI
Solvent-resistant brush