Permalac
Permalac #281 Standard Cold/Hot Thinner
Permalac #281 Standard Cold/Hot Thinner
5 in stock
Couldn't load pickup availability
#281 Thinner is a regular speed lacquer thinner. Use when the ambient temperature is 50°F to 65°F. Thin Pemalac Original, EF 20% when spraying. No thinner will be needed for brushing unless you notice brush strokes or irregularities.
Physical Properties
Color Clear
Volume Solids 0
Weight Solids 0
Weight per Gallon 7.25 lbs
VOC 870 g/l
Application Characteristics
Mix Ratio 4 to 1 for spraying
Dry Time 10 minutes to touch dry, 20 minutes recoat
Cure Time 24 hours
Recommended Uses:
When applying Permalac on steel or aluminum, first clean the metal with #281 or acetone. Apply
one coat of Permalac at a 1:1 ratio with #281. Allow this coat to dry for 20 minutes. Apply 2-3
#281 Standard Cold/Hot Thinner
more coats of Permalac, thinning each one 4:1 with #281 and allowing at least 15 minutes
between each coat.
When applying on brass or bronze, apply three coats at a 4:1 ratio with #281.
Application Equipment:
HVLP spray gun, Cap tip 1.2, 20-25 PSI
Solvent-resistant brush
Share
![Permalac #281 Standard Cold/Hot Thinner](http://shop.sculpt.com/cdn/shop/files/281-thinner-1g-front_5206fe19-41f2-4b82-88e9-b44accd3f7c7.jpg?v=1711001694&width=1445)
![Permalac #281 Standard Cold/Hot Thinner](http://shop.sculpt.com/cdn/shop/files/281-gallon_74c1b3d3-990d-4bed-84ab-d48b634f32ac.jpg?v=1711001694&width=1445)
- Choosing a selection results in a full page refresh.
- Opens in a new window.