Mixing: Use Bounce with no added water for maximum flexibility. All Purpose Foam Coat comes out more flexible when no or less water is added to the Bounce.  For a super rubbery coating, try a liquidy mixture of 9 parts Bounce to one part All Purpose Foam Coat, adding the powder to the Bounce, until the desired thickness is attained.

Can also be applied alone, or with just a little bit of Foam Coat to create a strong flexible paintable sealant.

For a chip resistant coating, start with 1 part liquid to 1 part All Purpose Foam Coat, and thin or thicken as desired.  Dilute the Bounce with water before mixing with Foam Coat to get a less flexible, super smooth, chip-resistant surface.

Thin layers can be applied to vertical and inverted surfaces with little or no sagging. 

Applying: Fill holes with pasty mixture. To coat large areas, make a more liquidy mixture until thin enough to apply with a paint brush. May be applied as thick as 3/8 inch, but multiple coats are stronger. Looks like smooth stone when dry. Try texturing the surface before coating sets. Bounce is compatible with our Grit Texturizers. Can be smoothed while drying, but not sandable once dry.

Set Time: Use within 15 minutes. Sets up in 30 minutes. Maximum bond and strength in 24 hours.

Clean-Up: Immediately clean tools and brushes with soapy water.

Finishing: Paint or stain as desired.

 

WARRANTY: HWFF Inc./dba Hot Wire Foam Factory warrants this product to be of merchantable quality when used or applied in accordance with the instructions herein. The product is not warranted as suitable for any purpose or use other than the general purpose for which it is intended. Liability under this warranty is limited to the replacement of its product (as purchased) found to be defective, or at the shipping companies’ option, to refund the purchase price. In the event of a claim under this warranty, notice must be given to The Hot Wire Foam Factory in writing. This limited warranty is issued and accepted in lieu of all other express warranties and expressly excludes liability for consequential damages. MSDS available.