Fusefx Bond-fx 30g Kit

BondFX is a unique two part platinum silicone coating that can be brushed or sprayed over tin based silicones, rendering the surface compatible with platinum silicones! Yes - you can now pour platinum silicones into tin silicone molds or paint them with FuseFX platinum silicone paints! (For best results, FuseFX Royal JeL-E should be used as a mold release.)

BondFX is fast setting and can be used not only as a primer for tin silicones, but also for seaming and patching tears, and encapsulating gel-filled appliances. 

The quick setting time and resistant to inhibition will make BondFX an essential tool in your silicone kit!

BondFX is a simple 50–50 mix (1 part A to 1 part B) and has a working time of 2 to 3 minutes and a cure time of
8 minutes.
Surface coating for brush painting:
For best results the silicone skin/surface should be painted as soon as possible after removing from mold.
Painting should be done on a fresh silicone piece.
We strongly recommend that the cured piece to be painted be no more than 2 days old.
Brush, stipple or spray BondFX over the entire surface to be painted. The surface is now ready to be painted
with FuseFX Platinum silicone paints.
Painting can be done while BondFX is still fresh or as soon as it's cured for best results.
For application by airbrushing:
A working time of 25 minutes can be achieved by diluting with a high grade solvent (Toluene, Naphthalene…) by
adding 1 part of mixed BondFX to 1.5 to 2 parts solvent.
Spray a minimum 4 coat of BondFX over the entire surface to be painted, let cure.
The surface is now ready to be painted with FuseFX Platinum silicone paints. Painting can be done while
BondFX is still fresh or as soon as it's cured for best results.
BondFX As a surface coat –
You can now pour Platinum Based silicone in a Tin Based silicone mold.
A mold release like FuseFX Royal JeL-E should be used. Spray mold release like a Petroleum solvent base
may weaken the BondFX properties as a barrier, but would still work.
Apply by brush (one to 2 coats) or sprayed several coats (minimum 6 coats) into a Tin Based Silicone mold
rendering the surface ready to pour Platinum Based Silicone.
Pouring can be done while BondFX is still fresh or as soon as it's cured for best results.
BondFX - BondFX for repairing seams in silicone –
(you will need FuseFX Smoothie for this project)
Thicken a small batch of BondFX. Work quickly, BondFX cures quickly. Apply to area to be seamed.
Next spray a coat of FuseFX Smoothie over the wet BondFX. Smoothie will allow you to move and sculpt the
BondFX without diluting it, shaping it to the desired texture.
Add more Smoothie if needed.
Once the BondFX has cured, you must wash off the Smoothie with warm water.
The surface is now clean and ready for additional coats of BondFX if needed. Do not use on skin.

SDS