Carbide Hand Tools Coarse

Perma-Grit's abrasive tools cut, sand and shape in any direction.  They outlast sandpaper thousands of times and can be used all all the materials, listed below and more.  If you are unable to cut or shape something, try Perma-Grit's range of abrasives, you will be amazed.  Simple tools to use, tough and will give far better results. 

Coarse grit equivelent to UK 180 / USA 60 grit sandpaper.

Angle File

Angle or Tangent hand file COARSE. Excellent anywhere there is a 90° angle needed. The R-201 is approximately 75°, which gives the builder the accuracy needed to shape a 90° angle.  Either an 1/8th radius or a sharp corner can be produced simply by rotating the tool. Model builders find this particularly useful for fabricating servo trays, it is also good for cleaning corners and edges on laser cut wood.

Hand File Flat

Flat hand file Coarse. Dims. 230 x 38mm thickness 1.6mm. Useful to get into narrow places where the sanding block is unable to fit.  Use to clean up slots, cut outs in former's and general sanding. Use to deburr aluminium, and other jagged edges.  For a longer and wider precision flat sander, try the Perma-Grit sanding blocks.

Round Tube File 14mm - 20mm

Round Steel Tube File 14mm (+/-0.5mm), COARSE. Dims approx. 215 x 14 x 14 mm.  Tungsten carbide abrasive grit, use to shape arches and curves with precision.  No need to glue sandpaper to dowels anymore!  These tools are perfect for fillets, and all concave curves.  Use to shape or enlarge holes or arches etc.  R203C may also be used in a pillar drill as drum sander!

Round Tube File COARSE, 20mm diameter (+/-0.5mm).   Dims approx. 215 x 20 x 20mm (+/-0.5mm) . Shape arches and curves with precision.  No need to glue sandpaper to dowels anymore!  These tools are perfect for fillets, grooves and all concave curves.  Use to shape or enlarge holes or arches etc. Shape cowlings, nose cones, wheel spats etc.

Radius External/Internal Curve

Half Round 13 mm Radius File COARSE. Gritted on the external curve. Dims. 231 x 22 x 7 mm approx. Shape arches and curves with precision.  No need to glue sandpaper to dowels anymore! These tools are perfect for fillets, and all concave curves.  Use to shape or enlarge holes or arches etc.  Radius external curve file.

13 mm Radius Internal Curved hand file, COARSE. Gritted on the internal surface. Dims 231 x 30 x 11 mm approx. Concave hand tool coarse grit on the internal curve.   Use to form leading and trailing edges, or radius any sharp corners etc. 

Round File 7mm

Round File 7mm (+/-0.5mm), COARSE. Dims approx. 235 x 7 x 7 mm (+/-0.5mm). Tungsten carbide abrasive gritted length approx. 110 mm.  Red plastic Comfy grip handle.  Use to shape arches and curves with precision.  No need to glue sandpaper to dowels anymore!  These tools are perfect for fillets, and all concave curves.  Use to shape or enlarge holes or arches etc.

Square File 7mm

Square tungsten carbide grit File 7mm Coarse (+/-0.5mm). Red plastic Comfy grip handle. Dims. approx. 230 x 7 x 7mm.  Gritted length 110mm.  Enlarge or shape holes fabricate Mini Servo trays. Cut in any direction and virtually any material, the same as all of our tools!

Set of 8

Set of 8 Hand Tools  COARSE, in a Red Canvas Tool Roll, velcro fastening. Contains:- F102 Flat File, R102 internal grit 13mm Radius File, R200C external grit 13mm Radius File, R201C  75 degree Angle File, R202C 20mm Tube File, R203C 14mm Tube File, R204C Round 7mm File, S204C Square 7mm File