| Article number: | 66C1506B |
| Availability: | Out of stock |
TASK® 5 & TASK® 6 low cost, high performance casting resins yield castings that are tan and virtually bubble free.These resins offer superior physical and performance properties compared to our popular Smooth-Cast® Series of general purpose casting resins. Vacuum degassing is not necessary and they offer the convenience of a 1A:1B by volume or weight mix ratio. The differences between TASK®5 and TASK®6 are the pot life and demold time.TASK® 5 & TASK® 6 have high tensile and flexural strength, as well as high flexural modulus. These plastics were formulated for a variety of industrial applications including pattern making and making prototype models. These resins are designed for casting in thicknesses up to ½” (1.27 cm).
Data At-A-Glance
| Mix Ratio By Volume | 1A:1B |
| Mix Ratio By Weight | 1A:1B |
| Specific Gravity | 1.07 g/cc |
| Specific Volume | 25.9 cu. in./lb. |
| Pot Life | 7 minutes |
| Cure Time | 75 minutes |
| Color | Tan |
| Elongation @ Break | 4 % |
| Shrinkage | 0.0031 in. / in. |
| Shore D Hardness | 75 |
| Tensile Strength | 5,200 psi |
| Tensile Modulus | 146,000 psi |
| Flexural Strength | 6,200 psi |
| Flexural Modulus | 182,500 psi |
| Compressive Strength | 5,570 psi |
| Heat Deflection Temp | 162 °F |
| Compressive Modulus | 65,000 psi |
| Mixed Viscosity | 800 cps |