Protective Coating Company PC-Superepoxy® Syringe 1oz

Article number: 054983016619
Availability: Out of stock

PC-SuperEpoxy® is a non-drip translucent paste epoxy suitable for conventional or static mixing. It has unlimited uses in bonding, assembling, filling and sealing most materials. Unlike conventional liquid epoxies, PC-SuperEpoxy® can be applied via a static mix nozzle vertically and overhead. It cures quickly at room temperature to form a resilient, non-conductive bond or seal that resists most chemicals, fresh and salt water, gasoline and fuel oil. Works great bonding steel to wood, fiberglass, aluminum, concrete, brick, glass, block, ceramics, hard plastics and much more. PC-SuperEpoxy® is the toughest, highest strength epoxy we manufacture.

Work Time: 15 minutes and tack free in 60 minutes

Cure Time: 4 hours (12 – 24 hours for full cure)

Here is a product that can take on the most challenging of projects with ease.

Adhesion strength in excess of 2500 psi (up to 4000 psi).

PC-SuperEpoxy® is a gel with the consistency like Vaseline.

Here are just a few specific uses (there are hundreds of other uses):



  •   Anchoring or securing railings to wood or fiberglass decking.
  •   Seal cracks and holes in decking.
  •   Attach chocks, cleats, handles and pulls.
  •   Anchor or secure iron balusters to step and hand rail.
  •   Fill cracked wood beam.
  •   Fix broken latch in car glove box.
  •   Attach axe head.

How to prepare a surface for bonding with PC-SuperEpoxy®

Remove contaminants such as dust, dirt, oil and grime with a solvents such as denatured alcohol (ethanol), acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner. Mild detergent solution in water is also good removing contaminants. Use a clean paper towel or rag for wiping. Do not use mineral spirits or paint thinner for removing contaminants.

Remove rust and loose paint with sandpaper or wire brush. Epoxy typically sticks to most paints. If there is a concern of the paint’s adhesion then remove it with sandpaper, wire brush or paint stripper.

Smooth, glossy and shiny surfaces should be roughened using sandpaper to increase adhesion.

How to clean-up after PC-SuperEpoxy® application

Clean up mixed epoxy before it cures with paper towels and solvent. Denatured alcohol (ethanol), acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner are suitable solvents for removing uncured epoxy. Cured epoxy can be removed with paint stripper or remover.


0 stars based on 0 reviews
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »