| Article number: | 033331020089 |
| Availability: | Out of stock |
EnviroTex Lite® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8 hours at 70°F, and reaches full strength and toughness in about 72 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for an attractive finish, however, two or more coats maybe applied one over the other to build additional thickness. Read all instructions prior to use.
What's included:
8 oz. Kit = 4 oz. A + 4oz. B (covers 2 sq. ft.)
16 oz. Kit = 8 oz. A + 8oz. B (covers 4 sq. ft.)
32 oz. Kit = 16oz. A + 16oz. B (covers 8 sq. ft.)
64 oz. Kit = 32oz. A + 32oz. B (covers16 sq. ft.)
1 gal. Kit = .5 gal. A + .5 gal. B (covers 32 sq. ft.)
| Mix Ratio: | 1:1 |
| Thin Film Set Time/Hour: | 8.5 |
| Durometer Hardness 2 Hours @ 60º C): | 76 +/- 4 |
| Tensile Strength: | 3108 |
| Tensile Modulus: | 142,300 |
| Tensile Elongation %: | 75 |
| Flexural Yield Strength: | 2617 |
| Flexural Yield Strain: | 6.4 |
| Flexural Yield Modulus: | 80,087 |
| Tg - ºC: | 47 |
| Viscosity CPS @ 77º F: | Resin (A) 1600 Hardener (B) 1200 |
| Density (lbs/gal): | Resin (A) 9.48 Hardener (B) 8.01 |
| VOC (grams/liter) Envirotex Lite is a 100% solids formulation.: | 0 |
| Gel Time (minutes) (100 gram mass @ 22º C) : | 46 +/- 5 |
| The test data and results set forth herein do not necessarily indicate the results that the buyer or user will attain. Full-scale testing and product performance is the responsibility of the buyer and user.: |