ETI

Resin casting is an exciting and fun craft that allows you to embed or encase almost any object in crystal clear plastic. Coins, shells, rocks, dried flowers, butterflies and insects are just a few of the examples of embedment possibilities.

EasyCast is a two component, low odor, solvent free, clear casting epoxy. It’s ideal for casting small decorative items such as kitchen and bathroom knobs or for surface coatings up to 3/8 inch in thickness.

EasyMold Silicone Putty is ideal for a wide range of impression type mold applications, including Castin’Craft Clear Casting Resin, EasyCast Clear Casting Epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals

Enviroset epoxy is a superior adhesive for bonding wood, metal, glass, ceramics, most plastics, concrete, graphite, etc. Enviroset epoxy is waterproof, heat & chemical resistant. Enviroset can also be used as a putty. Simply blend resin & hardener togethe

EnviroTex Lite® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8 hours at 70°F, and reaches full strength and toughness in about 72 hours.

EX-74 is an extremely clear, tough, high gloss surface coating formulated to produce a deep glass like appearance in a single layer on a sealed surface. Two or more layers are often applied for added depth and protection. EX-74 has been formulated for imp

ETI EX-88 2 Gallon Kit

FastCast™ is a two-component clear urethane casting resin, which turns white once set. Easy to use, 1:1 ratio and is odorless.  Ideal for casting, quick prototyping, miniatures, models, taxidermy and more. FastCast™ sets to a hard cast in approximately 10

ETI Jewelry Mold 33620 Polypropylene

Clear, colorless liquid, very low viscosity. Usually added in quantities of 0.5% to 3.0% of weight of resin for curing. Store in a cool place, keep tightly closed. Purchase ½ oz for a pint or quart of resin, and 1 oz for a gallon of resin.

Methyl Ethyl Ketone Peroxide, or MEKP, is required with all polyester resins, gel coats and vinyl ester resin. It is required in different concentrations as defined for each resin product.

Convenient pack of 3 – 10 oz. measure/mixing cups, 3 stir sticks and 1 disposable craft brushes.

Quick drying, fast build up, economical to use, peels easily from model, flexible and stretchable, harmless to most surfaces!

All molds require mold release when casting with Clear Polyester Casting Resin. We recommend Mold Release/Conditioner as a release agent and to clean, condition and extend the life of your molds. Convenient 4 oz. spray pump for easy of application.

These universal opaque pigments can be used with Castin’Craft Clear Polyester Casting resin and Easy Cast Clear Casting Epoxy. Secondary colors such as orange and purple are easy to create by blending two or more pigments.
Castin’Craft Opaque Pigments ar

Reusable Molds MC-1 Rectangle 2x1.5x1
Reusable Molds MC-2 Rectangle 2.25x2.6x1.6
Reusable Molds MC-3 Round 2.25x1
Reusable Molds MC-4 Rectangle 2x3x1
Reusable Molds MC-5 Half Dome 3x5x1
Reusable Molds MC-6 Square 3x3x1
Reusable Molds MC-

Surface Curing Agent: Eliminates a tacky surface resulting from resin exposed to moist air while curing. Do not use with clear pours, as it will cloud the resin. 2 oz/59 ml.

These universal dyes can be used with Castin’Craft Clear Polyester Casting Resin, Envirotex Lite, Ultra-Glo, Crystal Sheen and Easy Cast Clear Casting Epoxy. Transparent Dyes are available in 1oz. containers with drop dispenser.