TASK 9 Trial Kit

Article number: 751635458413
Availability: In stock (1)

TASK® 9 Colormatch is a high performance urethane casting resin that features very high compressive strength and tensile strength. TASK® 9 is clear amber, which makes this plastic very easy to color using SO-Strong® or IGNITE® colorants. With a mix ratio of 1A:1B by volume, TASK® 9 is easy to use and a low mixed viscosity (300 cps) ensures minimal bubble entrapment. Pot life is 7 minutes and cure time is about 60 minutes (depending on mass).TASK® 9 is ideal for making impact resistant tooling, color accurate prototypes / models as well as durable reproductions. This resin is designed for casting in thicknesses up to ½” (1.27 cm). 

  • Mix Ratio; 1A:1B by volume 115A:100B by weight
  • Mixed Viscosity (cps); 300 (ASTM D-2393)
  • Specific Gravity, g/cc; 1.14 (ASTM D-1475)
  • Specific Volume, cu. in. /lb.; 24.3 (ASTM D-1475)
  • Pot Life; 7 minutes @ 73°F/23°C (ASTM D-2471)
  • Cure time; 1 hour @ 73° F/23°C* *
  • Color; Clear Amber
  • Shore D Hardness; 85 (ASTM D-2240)
  • Ultimate Tensile, psi; 7,800 (ASTM D-638*)
  • Tensile Modulus; 370,000 psi (ASTM D-638*)
  • Elongation @ Break; 6 % (ASTM D-638*)
  • Flexural Strength; 11,850 psi (ASTM D-790*)
  • Flexural Modulus; 350,000 psi (ASTM D-790*)
  • Compressive Strength; 11,000 psi (ASTM D-695*)
  • Heat Deflection Temp; 131°F/55°C (ASTM D-648*)
  • Compressive Modulus; 98,000 psi (ASTM D-695*)
  • Shrinkage; 0.009 in/in (ASTM D-2566*
0 stars based on 0 reviews