TASK 6 Trial Kit

Article number: 751635466418
Availability: In stock (1)

TASK® 5 & TASK® 6 low cost, high performance casting resins yield castings that are tan and virtually bubble free.These resins offer superior physical and performance properties compared to our popular Smooth-Cast® Series ofgeneral purpose casting resins. Vacuum degassing is not necessary and they offer the convenience of a 1A:1B by volume or weight mix ratio. The differences between TASK®5 and TASK®6 are the pot life and demold time.TASK® 5 & TASK® 6 have high tensile and flexural strength, as well as high flexural modulus. These plastics were formulated for a variety of industrial applications including pattern making and making prototype models. These resins are designed for casting in thicknesses up to ½” (1.27 cm).  

Technical Data

Data At-A-Glance

Mix Ratio By Volume 1A:1B
Mix Ratio By Weight 1A:1B
Specific Gravity 1.07 g/cc
Specific Volume 25.9 cu. in./lb.
Pot Life 7 minutes
Cure Time 75 minutes
Color Tan
Elongation @ Break 4 %
Shrinkage 0.0031 in. / in.
Shore D Hardness 75
Tensile Strength 5,200 psi
Tensile Modulus 146,000 psi
Flexural Strength 6,200 psi
Flexural Modulus 182,500 psi
Compressive Strength 5,570 psi
Heat Deflection Temp 162 °F
Compressive Modulus 65,000 psi
Mixed Viscosity 800 cps
0 stars based on 0 reviews