|Availability:||In stock (37)|
A carefully guarded secret of Italian mold-makers for fifteen years, this silicone-based putty is hand sculpted instead of poured, will reduce your mold-making time by 50%, eliminate waste, and enable you to capture incredibly fine detail with molds that are far lighter than anything you can produce now. It is now available in the United States exclusively through The Compleat Sculptor, Inc
RESILPOM is a two-component, room-temperature (RTV), condensation-curing silicone compound. Beginning as a pasty mass, once cured, it becomes a strong molding compound with good mechanical properties and considerable dimensional stability.
Mix RESILPOM (buff colored) with either the fast catalyst (red) in a 50:1 ratio by weight (98% base to 2% catalyst) or the regular catalyst (yellow) in a 19:1 ratio by weight (95% base to 5% catalyst). Mix small quantities to avoid waste from pre-polymerization. Proper mixing has occurred when the color is uniform.This material is ideal for vertical surfaces due to its pasta-like nature. RESILPOM can be applied directly to the model, removed easily and cast in one day. RESILPOM has already been used to reproduce sensitive pieces in the antique and archeological industries. The variety of materials that can be cast into RESILPOM is large, including but not limited to Gypsum, Polyurethane Resin, Wax, Cement, Epoxy Resin, Forton MG, Other Rubbers and Low Temperature Metals.