|Availability:||In stock (3)|
EasyFlo 120 is a low-viscosity polyurethane casting plastic designed for slush casting or rotocasting. The controlled gelling process of this plastic makes it ideal to create hand slush cast or machine rotocast hollow parts with incredible toughness while remaining lightweight and cost-effective.
EasyFlo 120 castings can be left hollow or can be backfilled with a polyurethane such as one of the PolyFoam Series from Polytek.
EasyFlo 120 Liquid Plastic has a 1A:1B mix ratio by volume, a 2 to 2.5-minute pour time, and a 15 to 30-minute demold time. This resin can be easily color cast with PolyColor Dyes.
To create solid castings, consider using EasyFlo 60 or EasyFlo 95 (longer pour time).
Mix Ratio Shore Hardness Pour Time Demold Time Cured Color Mixed Viscosity Specific Gravity Specific Volume Maximum Exotherm
1A:1B by volume, 100A:90B by weight D65 2 – 2.5 min. 15 – 30 min. White 120 cP 1.03 26.9 in³/lb 200°F (1-lb mass)
Accessories: PolyColor Dyes, PolyFiber II, Bronze Powder, Fumed Silica, Poly 15 Part X Accelerator, PolyFil ND, Poly Purge Aerosol Dry Gas